For product & service enquiries pleace contact info@rotajet.co.uk or call +44 (0) 1924 271446.

Machine

Enquiries

Our machines are supplied as stand-alone plant, or as a intregrated "turn-key" system for a new or existing recycling or waste processing facility. For large systems we are typically commissioned to carry design studies.

Dryers

Mechanical Dryers

Rotajet manufacture a range of mechanical dryers for pre-drying film prior to thermal drying in plastic recycling plants. Typically in film recycling plants after shredding the film is usually processed in float sink tanks to remove dirt and grit etc…The processed film can carry up to 60-70% water after washing due to the thin gauge and surface area.

After the washing process the film fed into the Rotajet MDSC, the film is processed through the machine and the water is removed by screw compaction. The water pressed out is then pumped back to the washers for reuse. Typically the Rotajet MSDC can reduce the moisture in the film to 10-15%.

The standard Rotajet MSDC series are robustly manufactured from carbon steel and fitted with PLC which can be linked into existing plants.

Machines can also be manufactured from stainless steel if required

If you have any specific film drying requirements, we can design and manufacture bespoke solutions.


Thermal Drying

Rotajet manufacture a range of thermal dryers for drying film and rigid plastics in plastic recycling plants. Typically in film is pre-dried in a Rotajet MDSC mechincal dryer) prior thermal drying. Rigid plastic are dried directly in the thermal dryers.

The Rotajet RDD series of dryers, are fitted with a rotating drum fitted with a screw in which the wet plastic is fed and transferred through, the drum is fitted with a plenum chamber in from which hot pressurized air is directed onto the wet plastic, the air is then recirculated back heating system either electric or gas.

The standard Rotajet RDD series are robustly manufactured from carbon steel and fitted with PLC which can be linked into existing plants.

Machines can also be manufactured from stainless steel if required

If you have any specific drying requirements, we can design and manufacture bespoke solutions.